Tif IR-1 Infrared Refrigerant Leak Detector Manuel d'utilisateur télécharger pdf (Page 2)

Product Description

The TIF No. IR-1 uses infrared optics to create a refrigerant leak

detector that combines sensitivity, speed, battery life, portability,

and ease of use. This unit detects leaks as small as 0.15 oz/year,

and meets both SAE J1627 and J2791 standards.

The IR-1 comes with a wall charger and a car charger for its

compact lithium-ion battery—which can power the leak detector

for up to eight hours of continuous operation before needing to

recharge. A choice of three sensitivity settings keep false alarms

to a minimum while allowing detection of even the smallest leak

in a refrigerant contaminated environment. A 30-second, self-

calibration test occurs whenever the unit is powered on to ensure

optimal performance. A built-in replaceable lter blocks moisture

and particulates, preventing damage to the sensor.

Specications

Sensing element: enhanced infrared photo optics

Refrigerants: HFC, CFC, HCFC, and blends

Sensitivity level (per SAE J2791):

HIGH: 0.15 oz/year and higher

MED: 0.25 oz/year and higher

LOW: 0.5 oz/year and higher

Response time: less than one second

Battery life: up to 8 hours continuous use before recharge

Auto OFF: 10 minutes of inactivity

Battery: 3.7V, 1800 mAH rechargeable, lithium-ion (No. TIFIR-9)

Low battery LED: illuminates when 1 hour of battery life remains

Charge time: less than 4 hours @ 300 mA

Operating environment: 32ºF (0°C) to 122ºF (50°C) at <75% RH

Storage environment: <80% RH for detector and battery

For 80% battery recovery:

-4ºF (-20°C) to 140ºF (60°C) less than 1 month

-4ºF (-20°C) to 113ºF (45°C) less than 3 months

-4ºF (-20°C) to 68ºF (20°C) less than 1 year

Accessories included: wall charger, car charger, storage case,

battery (installed), and operator’s manual.

1 2 3 4 5 6 7 8

Pas de commentaire

Tif IR-1 Infrared Refrigerant Leak Detector Manuel d'utilisateur Page 2